2017-07-14, Eric

• Use vias to connect +1, -4 to diode pins (Done)
• Add 2 capacitors from -1 to GND and from +4 to GND (4 total). (Done) These should be thru-hole 0.1uF
• Fix the footprint for the SMA connector. The hole size is currently the same as the pad size, and it should be at least .020 larger.
• edit all the silkscreen text to be the same size, right-side up and placed on the board so as not to overlap anything.
• Add an overall legend on the silkscreen:

G-2 Quad Pulser
Input protection board
edf.bu.edu
D. Barnes  2017-07

• Get quotes for 3-4 day turn (Sunstone, Advanced) for 6-10 pieces
• Find parts, make a BOM, make a DigiKey? order