Changes between Initial Version and Version 1 of Xilinx_Programming_Cables


Ignore:
Timestamp:
Nov 8, 2013, 10:17:53 AM (6 years ago)
Author:
hazen
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Xilinx_Programming_Cables

    v1 v1  
     1A [http://www.digilentinc.com/ Digilent]
     2[http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&Nav2=Cables&Cat=Cable programming cable ]
     3(parallel or USB) can be used in place of a Xilinx parallel or USB
     4programming cable in applications where the JTAG logic power supply
     5is in the range of 2.8V-5V.
     6
     7A [http://joule.bu.edu/~hazen/jtag_test/JTAG_dongle.jpg
     8small adapter] from 0.1" male single row header to 2mm 14 pin ribbon
     9cable connector is needed.
     10
     11The pinout for the adapter is as follows.  Note that there is an alignment key
     12on the 2mm connector... this should be on the side with odd-numbered pins.
     13
     14{{{
     15  Digilent   Signal      2mm
     16  pin                    pin
     17   1          TMS         4
     18   2          TDI         10
     19   3          TDO         8
     20   4          TCK         6
     21   5          GND         1,3
     22   6          Vcc         2
     23
     24}}}
     25For reference, here is the
     26[http://www.xilinx.com/bvdocs/publications/ds097.pdf data sheet]
     27for the Xilinx Parallel Cable IV.
     28
     29[http://rmdir.de/~michael/xilinx/ XILINX JTAG tools on Linux]
     30
     31