Changes between Version 2 and Version 3 of XilinxUsbCable

Timestamp:

May 24, 2021, 3:53:07 PM (5 years ago)

Author:

Eric Hazen

Comment:

--

XilinxUsbCable

@@ +1 @@
+'''2021-05-24'''
+
+Clone "platform cable USB" bought on Amazon.  Running Ubuntu 18.04.  Installed driver using:
+
+{{{
+  $ cd /usr1//Xilinx/Vivado/2020.2/data/xicom/cable_drivers/lin64/install_script/install_drivers
+  $ sudo ./install_drivers
+INFO: Installing cable drivers.
+INFO: Script name = ./install_drivers
+INFO: HostName = hertz
+INFO: Current working dir = /usr1/Xilinx/Vivado/2020.2/data/xicom/cable_drivers/lin64/install_script/install_drivers
+INFO: Kernel version = 4.15.0-101-generic.
+INFO: Arch = x86_64.
+USB udev file exists and will not be updated.
+--File /etc/udev/rules.d/52-xilinx-ftdi-usb.rules exists.
+--File 52-xilinx-ftdi-usb.rules exists.
+--File 52-xilinx-ftdi-usb.rules version = 0001
+--File 52-xilinx-ftdi-usb.rules is newer than the destination file.
+--Updating rules file.
+--File /etc/udev/rules.d/52-xilinx-pcusb.rules exists.
+--File /etc/udev/rules.d/52-xilinx-pcusb.rules version = 0002
+--File 52-xilinx-pcusb.rules exists.
+--File 52-xilinx-pcusb.rules version = 0002
+--File 52-xilinx-pcusb.rules is already updated.
+
+INFO: Digilent Return code = 0
+INFO: Xilinx Return code = 0
+INFO: Xilinx FTDI Return code = 0
+INFO: Return code = 0
+INFO: Driver installation successful.
+CRITICAL WARNING: Cable(s) on the system must be unplugged then plugged back in order for the driver scripts to update the cables.
+}}}
+
+Now the Vivado 2020.2 hardware manager can see the device.
+
+
+'''2017'''
+
 I was able to get the Digilent USB-JTAG Programming Cable (rubber box model) working with ISE 14.7 under Ubuntu 14.04 using these instructions: