To set up the Raspberry Pi for this system, do the following:

• Burn the latest raspbian image onto an SD card
• Boot up a Raspberry Pi B+ with the SD card in it and proper peripherals connected (monitor, mouse, keyboard, ethernet)
• check out the software repository
• {{{

svn co gauss.bu.edu/svn/mri-stimulator/software }}}

• Make sure the directory smbus2 is included in your software directory.
• Configure the Raspberry Pi settings to enable SSH and I2C
• Find and note the IP of the Raspberry Pi.
• If the IP is lost or the pi moves to a new IP address, it can be found elsehow, but within the EDF it should be easy enough to keep the pi on the same IP address.