Version 8 (modified by Eric Hazen, 15 months ago) (diff)


Design-in-progress for an MC6845 based character display.

Design log:

2021-09-06 6845 speeds. Need a 3.15MHz character clock

  • MC6845 is too slow
  • MB89321A/B is good (6800 interface)
  • MB89322A/B is good (8080 interface)
  • HD46505 (only 3.0 MHz)
  • HD68x45S is good (3.7 MHz) x is A/B/C for bus speed

2021-09-05 Re-starting

Default is 640x480, as 80x30 text cells 8x16 each. So we need a cell address up to 80x30 = 2400 (12 bits) so MA0..11. For 16 vertical rows we need RA0..RA3.

An EEPROM character generator takes D0-D7 plus RA0..RA3 for the cell and provides 8 horizontal pixels.

For bitmap graphics, we instead route RA0..RA3 to video RAM bits and bypass the character generator (or program a region to be 1:3) to output a different 8-pixel pattern for each row.

VGA timing (640x480 60Hz):
    horiz:  16 + 96 + 48 + 640 = 800 at 25.2 MHz
    vert:   11 + 2 + 31 + 480 = 524

CPU Interface

Character mode: need 4k address space. Graphics mode: need 64K address space with funny address mapping.

2020-11-15 Looking at Schematic as of now. Many loose ends:

  • CPU interface is generic with DS0..DS3 but no mapping to devices on board.
  • MMUX signal not driven
  • nMEM_RD to memory page must be low for video output, probably needs to be MUXed. (there is one spare LS157 channel).

Fix a few things and re-commit. Thinking to get rid of the Arduino stuff or at least plan to move it to a shield. Need to double-check the schematic against the motorola app note.