V 1.0

• Update nine 0805 0.1 ohm resistors to correctly be 0805 and not 0805 wide (BOM)
• DONE-SCH Swap 0.1 ohm resistor for 1.4 V monitoring for 0.05 ohm one
• Swap R41 for 3k resistor. (BOM)
• DONE-SCH Add 1uF capacitors on all current monitor voltage dividers (ten in total)
• Update reset signal to correctly be not reset
• DONE-SCH Add 10 nF capacitor across R50
• DONE-SCH Fix DS18B20U ground pin
• 1.4V regulator resistors to R27 = 1.45M and R25 = 230k