| 1 | Hi Eric and Sam, |
| 2 | |
| 3 | Here is a link to files that I have saved from the Lecroy Wavesurfer |
| 4 | 452 (500MHz 2GS/s). |
| 5 | |
| 6 | http://darkmatter.bu.edu/~ainglis/lithiumChamberPulses/ |
| 7 | |
| 8 | The two directories are as follows: |
| 9 | |
| 10 | - a digitized signal of noise from a single preamp (#1) in a single |
| 11 | channel (#1 - which is just the farthest wire from the summing |
| 12 | amplifier) |
| 13 | - a series of signal readouts when providing the chamber with test |
| 14 | pulses. All of these readouts are from the summing amplifier. the |
| 15 | file name format is that it lists the preamplifier used (these are the |
| 16 | second generation preamplifiers - there is a number marked in sharpie |
| 17 | on the upper left corner of each preamplifier), and the wires that |
| 18 | they are placed on respectively (again, wire #1 being the farthest |
| 19 | away from the summing amplifier, then the voltage of the pulse that |
| 20 | was entered. |
| 21 | |
| 22 | I realize that this first attempt to pass signal information to you |
| 23 | will probably be riddled with some ambiguities or problems that we |
| 24 | need to get cleared up. I might need to give you the total |
| 25 | digitization scale for the voltage, although I thought it may be clear |
| 26 | from the numbers how it digitized. Let''s just take a look at these |
| 27 | and see if there is a better way to pass things over. |
| 28 | |
| 29 | Right now we are getting ready for a run of the chamber with HV and an |
| 30 | argon environment, so background, alpha, and neutron-lithium |
| 31 | interactions will be forthcoming. |
| 32 | |
| 33 | Thanks, |
| 34 | |
| 35 | -Andrew |
| 36 | |