* [http://ohm.bu.edu/~hazen/DataSheets/GE_Power/CP3500AC54TE_DS_July_22_2016.pdf Power Module] (model CP3000AC54TEZ)
* [http://www.mouser.com/ds/2/167/CPB-CPL%203-17-16-473069.pdf Power Shelf] (we have a J2014003L001)


----

 == Log ==

 === 2016-09-12 Dan ===
 config file updates for sane fan trays
/etc/rc.comtel
{{{
#CARRIER_OPTIONS="USE_DEFAULT_COOLING=TRUE" # enables default cooling strategy (non-zoned)
CARRIER_OPTIONS="USE_DEFAULT_COOLING=TRUE" # enables default cooling strategy (non-zoned)
}}}
/etc/shelfman.conf.comtel
{{{
#MIN_FAN_LEVEL = 40
MIN_FAN_LEVEL = 1
}}}
/etc/shelfman.conf
{{{
# COOLING_FAN_DECREASE_TIMEOUT = 0                                            
COOLING_FAN_DECREASE_TIMEOUT = 1        
# COOLING_FAN_INCREASE_TIMEOUT = 0                                            
COOLING_FAN_INCREASE_TIMEOUT = 1           
}}}


 === 2016-09-12 ===
* Using a POT, the power shelf output voltage was set to 48V

* Controller pinout
|| J1 pin/color || Arduino pin || use   ||
|| 13/brown     ||             || SCL_0 ||
|| 15/red       ||             || SDA_0 ||
|| 18/white     ||             || Alert#_0 ||
|| 19/orange    ||             || \EN_B ||
|| 21/blue      ||             || \EN_A ||
|| 20/brown     ||             || ground ||
|| 22/red       ||             || ground ||