* [http://ohm.bu.edu/~hazen/DataSheets/GE_Power/CP3500AC54TE_DS_July_22_2016.pdf Power Module] (model CP3000AC54TEZ)
* [http://www.mouser.com/ds/2/167/CPB-CPL%203-17-16-473069.pdf Power Shelf] (we have a J2014003L001)
* [https://www.artesyn.com/computing/products/product/atca-f140-40g-advancedtca-switch-blade ATCA-F140 Switch]

----
 == IMPORTANT NOTES ==
* The COB's insertion lever's sensor is broken and you must run clia commands to install/uninstall it. This involves commands typed into the shelf manager (talk to Dan) 
  
 To install: Insert COB as you normally would and then run the following command to tell the shelf the lever is correctly set
 
  {{{ clia sendcmd 0x96 0x2e 0x08 0x0a 0x40 0x00 0x00 0x01 }}} 

  Where 0x96 is the IPMI address for the physical slot 2 and logical slot 11

 To remove: Type the following command to simulate the lever being opened
  {{{ clia sendcmd 0x96 0x2e 0x08 0x0a 0x40 0x00 0x00 0x01 }}}
  Wait for the COB state to be inactive and then remove it physically.

----

 == Log ==

 === 2016-09-12 Dan ===
 config file updates for sane fan trays

/etc/rc.comtel
{{{
#CARRIER_OPTIONS="USE_DEFAULT_COOLING=TRUE" # enables default cooling strategy (non-zoned)
CARRIER_OPTIONS="USE_DEFAULT_COOLING=TRUE" # enables default cooling strategy (non-zoned)
}}}
/etc/shelfman.conf.comtel
{{{
#MIN_FAN_LEVEL = 40
MIN_FAN_LEVEL = 1
}}}
/etc/shelfman.conf
{{{
# COOLING_FAN_DECREASE_TIMEOUT = 0                                            
COOLING_FAN_DECREASE_TIMEOUT = 1        
# COOLING_FAN_INCREASE_TIMEOUT = 0                                            
COOLING_FAN_INCREASE_TIMEOUT = 1           
}}}
{{{
#COOLING_POLL_TIMEOUT =30                                                       
COOLING_POLL_TIMEOUT =5                                                       
}}}

 === 2016-09-12 ===
* Using a POT, the power shelf output voltage was set to 48V

* Controller pinout
|| J1 pin/color || Arduino pin || use   ||
|| 13/brown     ||             || SCL_0 ||
|| 15/red       ||             || SDA_0 ||
|| 18/white     ||             || Alert#_0 ||
|| 19/orange    ||             || \EN_B ||
|| 21/blue      ||             || \EN_A ||
|| 20/brown     ||             || ground ||
|| 22/red       ||             || ground ||