Version 108 (modified by 20 months ago) (diff) | ,
---|
Project APOLLO
![]() | This is a project to develop a common ATCA blade which can be used for readout and triggering applications in LHC experiments. It is named after the Apollo program CSM spacecraft which separated into Command and Service modules. | ![]() |
Debug Log
- Apollo Rev2a Bring-up -- Please log all debugging activity here
- Apollo RevB Bring-up
- Apollo RevA
Quick Links
- Apollo Manual
- TWEPP 2019 paper: arXiv:1911.06452 Talk
- Document SVN: http://gauss.bu.edu/svn/common-atca-blade
- Monitoring at BU
Remote Users
- Remote Access Instructions
- SM Inventory git -- Most accurate, but only SM modules
- Blade IPs at the TIF here.
- BU SM status (realtime)
HW
- Apollo Inventory -- List of boards with location and status (including MAC/IP addresses)
SM
- Hardware GitHub: https://github.com/apollo-lhc (Service Module)
- (historical) SVN: http://gauss.bu.edu/svn/common-atca-blade.hardware (BU Service Module)
Rev 2a
Dan, where is the documentation?
Rev 2
- Rev2 SoCs
- ServiceModuleRev2ECOList -- list of ECOs for the Rev 2 service module
- Rev 2 Schematics:
- Service module (Boston): carrier.pdf
Rev 1/A
- Rev 1 Schematics:
- Service module (Boston): carrier.pdf
- FrontPanelBoard: schematic • pcb
- FacePlateMechanics
- Comments / ECOs
EN_ONE_JTAG_CHAIN
should have a pull-up/down and/or jumper so something sensible happens when the IPMC is not installed or programmed.- Serial comms between Zynq and CM should be possible without IPMC intervention.
- How to turn on payload power with no IPMC installed/running?
- JTAG (and other GPIO) signals must obey ENABLE/READY to avoid driving CM logic when not powered
- ServiceModuleRevAECOList -- list of ECOs for the Rev A service module
CM
IPMC
- ApolloIPMC -- Documentation on IPMC for Apollo (see also CERN IPMC page)
ATLAS
- DRAFT specification (ATLAS specific for now): common_blade.pdf
Purchasing
Info and Help
Software
- UIOuHAL Slides 10-12 GITHUB UIOuHAL
- BUTool+ApolloSM single checkout
- ApolloSM Software ToDo -- ApolloSM Software To-Do-List
Firmware
Aux boards
- ApolloClocksTestBreakout -- "PicoDTH" clocks breakout for ATCA J23
- DummyCommandModule -- Breakout/loopback for CM connectors
Reference Material
- ATLAS SoC URD EDMS
- ATCA spec (password)
- CMS ATCA use: IN2018_002.pdf (update April 2019)
- CMS DTH spec: IN2018_001.pdf (update April 2019)
- CMS tracker repository
- Carrier specs
- ZYNQ DBS - Zynq daughterboard information
- TE Connectivity ATCA brochure
- JtagSVFProgramming -- collected notes on JTAG from SVF files
- Zynq eMMC
- device-tree
Firmware Reference
- IPBus repository
- IPBB Primer (IPBus builder)
ApolloHistory -- older stuff
Attachments (1)
-
carrier.pdf (2.6 MB) - added by 2 years ago.
Apollo SM rev2 schematic