wiki:Carrier specs

Carrier blade specs

This is a working page on keeping track of requirements for the BU ATLAS/CMS Carrier blade.

Expect this to change often.

Zone 2

  • Ethernet
  • CMS TTC
  • Parts parts parts
    • TE 1766500-1 Zone 1 connector
    • TE 6469001-1 Zone 2 connector
    • TE 1-1469373-1-ND Guide module
    • Schroff 20818-160 front panel/handle kit
    • Elma 66-536-28 panel
      • 81-300-00 and 81-301-01 handles
      • 81-088-1 microswitch

P23 Connections (Base ethernet)

P23 Row Port Pair Base Channel Function
6 0 tx 2 BI_DA (10/100 TX )
6 0 rx 2 BI_DB (10/100 RX )
6 1 tx 2 BI_DC
6 1 rx 2 BI_DD
5 0 tx 1 BI_DA (10/100 TX )
5 0 rx 1 BI_DB (10/100 RX )
5 1 tx 1 BI_DC
5 1 rx 1 BI_DD

P23 Connections (CMS only)

P23 Row Port Pair CMS Function
4 0 Tx LDAQ out 10Gb/s
4 0 Rx LDAQ in 10Gb/s
4 1 Tx Reserved STDIO
4 1 Rx Reserved STDIO
3 2 Tx TCDS2 Out (throttling, TTS+)
3 2 Rx TCDS2 In (timing, TTC+)
3 3 Tx Precision Clock
3 3 Rx LHC Clock

NOTE: "Precision Clock" is reverse direction from standard!

Zone 1 / Power

ATCA PWR 12V stock (ATCA/12V) price power notes
GE PIM400 QBVW033A0B Power Module mouser / mouser $72/$70 400W
ATCR250 digikey 242.14 250W no blue LED supply.
DIM3R3400 Q48SC12033 mouser / mouser $90 @ 45cnt(min) / $65 400 W 12V has PMBus.

Zynq

  • ZYNQ DBS - Zynq daughterboard information

IPMC

Mezz

  • Below is for each of two mezz boards
  • So 2x the below for the double-width CMS mezz

Power/LS connector

  • Mezz side P/N: ET60T–D02–3–08–000–S–R1–S (Do we want to save a little space by using the Top guide post?)
  • Blade side P/N: ET60S-D02-3-08-000-S-R1-S
  • Power
    • 2 power blades (12V + return) @ 60A max
    • ~200 W per connetor
  • Low speed signals (~16)

pos Row 1 Row 2 Row 3
1 PWR_OK gnd UC_nRST
2 TMS gnd TCK
3 TDO gnd TDI
4 SDA sense IPMC gnd SCL sense IMPC
5 TX IPMC gnd Rx IPMC
6 TX ZYNQ gnd Rx ZYNQ
7 PWR_ENA gnd ZYNQ GPIO2
8 ZYNQ GPIO3 gnd PS_RST

High-speed connector

  • ERF8-RA
  • 2.2A per pin (2-powered)
  • Mezz side P/N: ERM8-013-01-L-D-RA-DS
  • Blade side P/N: ERF8-013-01-L-D-RA
  • 2 Tx and 2 Rx to the zynq.
  • pinout
Pos Row 1(short) Row 2(long)
1 gnd gnd
2 Tx1-P Tx2-P
3 Tx1-N Tx2-N
4 gnd gnd
5 Rx1-P Rx2-P
6 Rx1-N Rx2-N
7 gnd gnd
8 HQ_CLK-P LHC_CLK-P
9 HQ_CLK-N LHC_CLK-N
10 gnd gnd
11 TTC-P TTS-P
12 TTC-N TTS-N
13 gnd gnd

Mechanics

carrier buses

Ethernet

  • UW ESC
Port type use
QSGMII zynq fabric
SGMII zynq arm
10/100 IPMC ZYNQ
10/100/1G SERVICES 1
10/100/1G SERVICES 2
10/100/1G Front Panel
  • mac addrs?

Serial number

  • EEPROM?

Power supplies

  • 12V (current: mezz?)
  • 3.3V (current: ESC + IPMC?)
  • 5V (Zynq supply?)
  • 1.2V (CMS timing retimers)
  • 2.5V (CMS XP switch)
Last modified 4 weeks ago Last modified on Jul 25, 2019, 2:41:02 PM