== Assembly ==
 * remove first two rows of FP connector pin tips on the bottom (add kapton tape)
 * Metal FP + upper and lower switches.
   * Two Rounded head screw M2.5 x 5 mm 5306-11
   * Two Rounded head screw M2.5 x 8.3 mm 5441-38
   * ATCA microswitch (bottom connector)
 * ESM 
   * two 4.5mm x 6mm hex M2.5 standoffs
   * two M2.5x6 screws (bottom)
   * two M2.5x4 screws (top)

== Base resistance ==
||          || SN-01 || SN-02 || SN-03 || SN-04 || SN-05 || SN-06 || SN-07 || SN-08  || SN-09 || SN-10 || SN-11  || SN-12 ||
|| 12V0     ||   10k ||   10k ||   10k ||  9.4k ||  9.6k ||  9.6k ||  9.6k ||  9.5k  ||  9.5k ||  9.5k ||  9.5k  ||  9.5k ||
|| 3V3 STBY ||    63 ||    56 ||    63 ||   63  ||  64   ||  64   ||  64   ||  64    ||  64   ||  64   ||  64    ||  64   ||
|| 3V0      ||   14k ||   24k ||   14k ||   14k ||  14k  ||  14k  ||  14k  ||  13.8k ||  14k  ||  14k  ||  13.8k ||  14k  ||
|| 4V5      ||   14k ||   24k ||   14k ||   14k ||  14k  ||  14k  ||  14k  ||  13.6k ||  14k  ||  14k  ||  13.7k ||  14k  ||
|| 1V8      ||  1.0k ||  1.2k ||    1k ||    1k ||  1k   ||  1k   ||  1k   ||  1k    ||  1k   ||  1k   ||  1k    ||  1k   ||
|| 3V3      ||    1k ||    1k ||  1.1k ||    1k ||  1k   ||  1k   ||  1k   ||  1k    ||  1k   ||  1k   ||  1k    ||  1k   ||
|| 1V8Z     ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k  ||  3.8k ||  3.8k ||  3.8k  ||  3.8k ||
|| 3V3Z     ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k ||  3.8k  ||  3.8k ||  3.8k ||  3.8k  ||  3.8k ||
|| 3VZ      ||   14k ||   24k ||   14k ||   14k ||  14k  ||  14k  ||  14k  ||  13.7k ||  14k  ||  14k  ||  14k   ||  14k  ||
|| 4V5Z     ||   9k ||    13k ||  9.2k ||    9k ||  9.2k ||  9.2k ||  9.2k ||  9k    ||  9k   ||  9k   ||  9k    ||  9k   ||
|| -48VA    ||   36k ||   36k ||   36k ||   35k ||  36k  ||  36k  ||  36k  ||  36k   ||  36k  ||  36k  ||  36k   ||  36k  ||
|| -48VB    ||   36k ||   37k ||   36k ||   35k ||  36k  ||  36k  ||  36k  ||  36k   ||  36k  ||  36k  ||  36k   ||  36k  ||

== Power up ==
 Test 1
 * Nothing installed: 48V @ 0.08A with 1A limit
    3V3 STBY OK

 Test 2
 * 12V en jumper 48V @ 0.14A
    3V3 STBY OK
    12V OK

 Test 3 
 * Remove 12V en jumpter
 * Installed open ipmc 

 Test 4
 * Installed ESM + IPMC 48V @ 0.18A

 Test 5
 * Install above + zynq (limit?)
     
|| Test || SN-01 || SN-02 || SN-03 || SN-04 || SN-05   || SN-06   || SN-07 || SN-08 || SN-09   || SN-10 || SN-11 || SN-12  ||
|| 1    || 0.08A || 0.08A || 0.09A || 0.08A || 0.08A   || 0.09A   || 0.09A || 0.08A || 0.09A   || 0.09A || 0.09A || 0.09A  || 
|| 2    || 0.14A || 0.14A || 0.15A || 0.14A || 0.14A   || 0.14A   || 0.15A || 0.14A || 0.14A   || 0.14A || 0.14A || 0.14A  ||
|| 3    || 0.15A || 0.15A || 0.15A || 0.15A || 0.15A   || 0.15A   || 0.16A || 0.15A || 0.15A   || 0.15A || 0.15A || 0.15A  ||
|| 4    || 0.18A || 0.18A || 0.19A || 0.18A || 0.18A** || 0.18A** || 0.19A || 0.18A || 0.18A** || 0.18A || 0.18A || 0.18A  ||
|| 5    ||       ||       || 0.54A || 0.50A || 0.53A** || 0.53A** || 0.54A || 0.54A || 0.52A** || 0.54A || 0.54A || 0.45A* || 

*: No boot media, no front panel board
**: Using ESM from SN-10 (ESM # 27)