Changes between Version 15 and Version 16 of AllBoardsLayoutCheckJuly2018


Ignore:
Timestamp:
Jul 16, 2018, 10:49:04 AM (6 years ago)
Author:
Hugo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • AllBoardsLayoutCheckJuly2018

    v15 v16  
    4646
    4747* Renumber references: 
    48  * Male connectors (P1-P16 are perfect)
    49  * Resistor packs should be RP1...
    50  * USB and RJ-14 should be J1...
    51 * Delete R6 and R7 from the design (A, B) go in parallel to the two RJ14 jacks
    52 * Re-route (A, B) to run next to each other (they are a differential pair)
    53 * Delete or hide the reference designators "MH1" etc on mounting holes on the silkscreen
    54 * USB footprint has spacing errors
     48 * OK HL Male connectors (P1-P16 are perfect)
     49 * OK HL Resistor packs should be RP1...
     50 * OK HL USB and RJ-14 should be J1...
     51* OK HL Delete R6 and R7 from the design (A, B) go in parallel to the two RJ14 jacks
     52* OK HL Re-route (A, B) to run next to each other (they are a differential pair)
     53* OK HL Delete or hide the reference designators "MH1" etc on mounting holes on the silkscreen
     54* OK HL USB footprint has spacing errors
    5555* RJ-14 footprint is wrong.  Mechanical holes should be above signal holes with pin 1 in upper left.
    56 * Hole size for power jumpers is wrong.  See drawing for 952-2207-ND.  Recommended hole size is 2mm.
    57 * Change P/N for 16 pin headers (P1-P16) to increase height.
     56* OK HL Hole size for power jumpers is wrong.  See drawing for 952-2207-ND.  Recommended hole size is 2mm.
     57* OK HL Change P/N for 16 pin headers (P1-P16) to increase height.
    5858
    5959* OK HL Double check USB footprint